EPJ Web of Conferences
Volume 94, 2015DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||5|
|Published online||07 September 2015|
Dynamic testing of concrete under high confined pressure. Influence of saturation ratio and aggregate size
1 Laboratoire Sols, Solides, Structures et Risques, Université Grenoble Alpes, BP. 53, 38041 Grenoble Cedex 9, France
2 Laboratoire de Mécanique des Solides, Ecole Polytechnique, 91128 Palaiseau, France
a Corresponding author: email@example.com
Published online: 7 September 2015
Concrete structures can be exposed to intense pressure loadings such as projectile-impact or detonation near a concrete structural element. To investigate the mechanical behaviour of concrete under high confining pressure, dynamic quasi-oedometric compression tests have been performed with a large diameter (80 mm) Split Hopkinson Pressure Bar apparatus. The concrete sample is placed within a steel confining ring and compressed along its axial direction. Hydrostatic pressures as high as 800 MPa and axial strain of about − 10% are reached during the tests. In the present work, experiments have been conducted on two types of concrete: MB50 microconcrete with a maximum grain size of 2 mm and R30A7 ordinary concrete of maximum grain size about 8 mm. Both concretes are tested in dry or saturated conditions. According to these dynamic experiments it is noted that grain size has a small influence whereas water content has a strong effect on the confined behaviour of concrete.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.