| Issue |
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01078 | |
| Number of page(s) | 4 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/20159401078 | |
| Published online | 07 September 2015 | |
https://doi.org/10.1051/epjconf/20159401078
Experimental investigation on shear fracture at high strain rates
1 Solid Mechanics Laboratory (CNRS-UMR 7649), Department of Mechanics, École Polytechnique, Palaiseau, France
2 Impact and Crashworthiness Lab, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge MA, USA
3 Department of Mechanical and Process Engineering, ETH Zurich, Switzerland
Published online: 7 September 2015
Adiabatic shear banding is a well-understood failure mechanism of metals at high strain rates. In addition, recent research on the ductile fracture of metals has demonstrated that shear localization at the microscale is also an important precursor of fracture initiation at low strain rates. This talk presents a new shear fracture specimen which is used to conduct fracture experiments on advanced high strength steel sheets at strain rates of up to 1/s in a hydraulic testing machine and for strain rates of up to 2500/s in a Split Hopkinson Bar system. The experimental result for a 22 MnB5 steel show a significant increase in ductility as a function of strain rate. Results from scanning electron microscopy are also shown to provide insight into the effect of the strain rate on the shear localization at the microscale.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.