EPJ Web Conf.
Volume 140, 2017Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media
|Number of page(s)||4|
|Section||Particle simulations and particle-based methods|
|Published online||30 June 2017|
Investigating the effect of unloading on artificial sandstone behaviour using the Discrete Element Method
1 MSc student, Department of Civil, Environment & Geomatic Engineering, University College London, London UK
2 Senior Lecturer, Department of Civil, Environment & Geomatic Engineering, University College London, London UK
3 Professor, Department of Civil, Environment & Geomatic Engineering, University College London, London UK
* Yueqin Huang: email@example.com
Published online: 30 June 2017
The Discrete Element Method (DEM) was used to simulate the mechanical behaviour of a reservoir sandstone. Triaxial tests were carried out using 3D-DEM to simulate the stress-strain behaviour of a sandstone with comparisons made between the numerical tests and the laboratory tests. The influence of isotropic unloading was investigated, which was found to have impacts on bond breakages and was successfully captured in the 3D shearing processes. It was found that bond breakages correlated strongly with the stress-strain behaviour of the sandstone affecting the peak strength. It was also found that unloading affected the bond breakages, which then changed the mechanical behaviour of sandstone. The tangent stiffnesses of simulated virgin and cored samples under different confining stresses were compared. From the tangent stiffnesses, gross yield envelopes and the yielding surfaces for unloaded samples and virgin samples were plotted and analysed in detail.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.