| Issue |
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
|
|
|---|---|---|
| Article Number | 02081 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201714302081 | |
| Published online | 12 May 2017 | |
https://doi.org/10.1051/epjconf/201714302081
Design of MSR primary circuit with minimum pressure losses
University of West Bohemia, Faculty of Mechanical Engineering, Department of Power System Engeneering, Univerzitni 8, 306 14 Plzen, Czech Republic
* noga@kke.zcu.cz
** zitek@kke.zcu.cz
**** valenta@kke.zcu.cz
Published online: 12 May 2017
This article describes a design of a MSR primary circuit with minimum pressure losses. It includes a brief description of this type of a reactor and its integral layout, properties, purpose, etc. The objective of this paper is to define problems of pressure losses calculation and to design a proper device for a primary circuit of MSR reactor, including its basic dimensions. Thanks to this, it can become an initial project for a construction of a real piece of work. This is the main contribution of the carried out study. Of course, this article is not a detailed solution, but it points out facts and problems, which future designers may have to face. The further step of our work will be a reconstruction of the current experiment for a two-stage flowing.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.