EPJ Web Conf.
Volume 146, 2017ND 2016: International Conference on Nuclear Data for Science and Technology
|Number of page(s)||4|
|Published online||13 September 2017|
On the use of the generalized SPRT method in the equivalent hard sphere approximation for nuclear data evaluation
1 CEA, DEN, Cadarache, 13108 Saint-Paul-les-Durance, France
2 IAEA, Nuclear Data Section, 1400 Vienna, Austria
3 EC-JRC, 2440 Geel, Belgium
4 INRNE, 1784 Sofia, Bulgaria
a e-mail: email@example.com
Published online: 13 September 2017
A consistent description of the neutron cross sections from thermal energy up to the MeV region is challenging. One of the first steps consists in optimizing the optical model parameters using average resonance parameters, such as the neutron strength functions. They can be derived from a statistical analysis of the resolved resonance parameters, or calculated with the generalized form of the SPRT method by using scattering matrix elements provided by optical model calculations. One of the difficulties is to establish the contributions of the direct and compound nucleus reactions. This problem was solved by using a slightly modified average R-Matrix formula with an equivalent hard sphere radius deduced from the phase shift originating from the potential. The performances of the proposed formalism are illustrated with results obtained for the 238U+n nuclear systems.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.