EPJ Web Conf.
Volume 146, 2017ND 2016: International Conference on Nuclear Data for Science and Technology
|Number of page(s)||4|
|Section||Experimental Facilities, Equipment, Techniques and Methods|
|Published online||13 September 2017|
Simulations of the stopping efficiencies of fission ion guides
1 Uppsala University, Department of Physics and Astronomy, PO Box 256, 751 05 Uppsala, Sweden
2 University of Jyväskyl”a, Department of Physics, PO Box 35, 40014 University of Jyväskylä, Finland
a e-mail: firstname.lastname@example.org
Published online: 13 September 2017
With the Ion Guide Isotope Separator On-Line (IGISOL) facility, located at the University of Jyväskylä, products of nuclear reactions are separated by mass. The high resolving power of the JYFLTRAP Penning trap, with full separation of individual nuclides, capacitates the study of nuclides far from the line of stability. For the production of neutron-rich medium-heavy nuclides, fissioning of actinides is a feasible reaction. This can be achieved with protons from an in-house accelerator or, alternatively, with neutrons through the addition of a newly developed Be(p,xn)-converter. The hereby-obtained fission products are used in nuclear data measurements, for example fission yields, nuclear masses, Q-values and decay spectroscopy. Prior to separation, the ionized reaction products are stopped in a helium-filled gas cell, referred to as the ion-guide. In this work we present simulations of the stopping of fission products in an ion guide developed for neutron-induced fission. The production and extraction rates are evaluated and compared against experimental values.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.