| Issue |
EPJ Web Conf.
Volume 146, 2017
ND 2016: International Conference on Nuclear Data for Science and Technology
|
|
|---|---|---|
| Article Number | 08008 | |
| Number of page(s) | 4 | |
| Section | Medical Applications | |
| DOI | https://doi.org/10.1051/epjconf/201714608008 | |
| Published online | 13 September 2017 | |
https://doi.org/10.1051/epjconf/201714608008
How nuclear data collected for medical radionuclides production could constrain nuclear codes
1 Laboratoire SUBATECH, CNRS/IN2P3, Ecole des Mines de Nantes, Université de Nantes, 4, rue Alfred Kastler, 44307 Nantes, France
2 GIP ARRONAX, 1 rue Aronnax, 44817 Saint Herblain, France
a e-mail: Arnaud.Guertin@subatech.in2p3.fr
Published online: 13 September 2017
The aim of this article is to give the status of nuclear data collected in the framework of the production of innovative radionuclides for therapy and diagnosis applications in collaboration with the GIP ARRONAX, which possesses a multi-particle high energy cyclotron, and to show constrains that can be put on nuclear codes. In order to assess the cross section of a given production route, experiments have been carried out using the stacked-foil technique and gamma-spectroscopy for a set of radionuclides of medical interest: photon (Tc-99m) and positon (Sc-44g) emitters for diagnosis, electron (Re-186g, Tb-155, Sn-117m) and alpha particle (Th-226, Ra-233, Bi-213) emitters for therapeutic applications. A systematic comparison has been performed between the results from the TALYS code (version 1.6) and the large set of data collected using different projectiles (proton, deuteron and alpha particle) from few MeV up to 70 MeV and covering a wide range of target masses. A better overall agreement with our experimental data has been obtained with a combination of models already included in the TALYS code differing from the default one.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.