| Issue |
EPJ Web Conf.
Volume 153, 2017
ICRS-13 & RPSD-2016, 13th International Conference on Radiation Shielding & 19th Topical Meeting of the Radiation Protection and Shielding Division of the American Nuclear Society - 2016
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 10 | |
| Section | 3. Accelerators & Fusion Facilities | |
| DOI | https://doi.org/10.1051/epjconf/201715303008 | |
| Published online | 25 September 2017 | |
https://doi.org/10.1051/epjconf/201715303008
Shielding design and radioprotection for Andromede and ThomX accelerators
1 iRSD – ingénierie Radioprotection sûreté démantèlement, UPS3364, CNRS/INP, 91898 Orsay, France
2 IPNO – Institut de physique nucléaire d’Orsay, UMR8608, CNRS/IN2P3, Université Paris-Sud, 91898 Orsay, France
* Corresponding author: jean-michel.horodynski@u-psud.fr
Published online: 25 September 2017
The Institut de physique nucléaire – Institute of Nuclear Physics (IPN) and the Laboratoire de l’accélérateur linéaire – Laboratory of the linear accelerator (LAL) are about to build two accelerators at the University Paris-Sud, Orsay. Andromede is a new imaging mass spectrometry instrument for surface analysis: the electron positron emission microscope (EPEM) will analyse impacts on a surface made by nano-particles (Au404) in the keV to MeV range to study ion-surface interactions. ThomX is a compact X-ray source (energy up to 90 keV – flux up to 1013 photons.s-1) that will produce X-rays using Compton backscattering effect between an electron beam and a laser. In order to use these machines in the same area, hutches are designed to comply with French regulations for radiation protection. This paper presents the methods used to design the hutches, complying with safety objectives, technical issues and budget.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.