Issue |
EPJ Web Conf.
Volume 162, 2017
International Conference on Applied Photonics and Electronics 2017 (InCAPE2017)
|
|
---|---|---|
Article Number | 01071 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/epjconf/201716201071 | |
Published online | 22 November 2017 |
https://doi.org/10.1051/epjconf/201716201071
On-chip temperature-based digital signal processing for customized wireless microcontroller
School of Microelectronic Engineering, Universiti Malaysia Perlis, 02600 Malaysia.
* Corresponding author: farhafaezal@gmail.com
Published online: 22 November 2017
Increases in die size and power density inside system-on-chip (SoC) design have brought thermal issue inside the system. Uneven heat-up and increasing in temperature offset on-chip has become a major factor that can limits the system performance. This paper presents the design and simulation of a temperature-based digital signal processing for modern system-on-chip design using the Verilog HDL. This design yields continuous monitoring of temperature and reacts to specified conditions. The simulation of the system has been done on Altera Quartus Software v. 14. With system above, microcontroller can achieve nominal power dissipation and operation is within the temperature range due to the incorporate of an interrupt-based system.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.