Issue |
EPJ Web Conf.
Volume 170, 2018
ANIMMA 2017 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 5 | |
Section | Fundamental physics | |
DOI | https://doi.org/10.1051/epjconf/201817001010 | |
Published online | 10 January 2018 |
https://doi.org/10.1051/epjconf/201817001010
Development of Large-Area Charged Particle Detector with Inorganic Scintillator Plates and Wavelength Shifting Fibers
Email: takahiro.hqa125@gmail.com
Published online: 10 January 2018
A Large-area charged particle detector for highenergy physics experiments has been developed. This detector includes inorganic scintillator plates with thicknesses of 0.5 mm and wavelength-shifting fibers (WLSFs) of 0.2 mm in diameters. The size of effective area is 1 m by 1 m. The WLSFs are connected to both plate surfaces optically, and on the top and the bottom, fibers are attached along to x and y-axis direction, respectively. The best WLSF to obtain large number of photoelectrons is determined, which enables us to detect charged particles with thinner scintillation crystals. This means an improvement of position resolution of this detector. The number of photoelectrons obtained from a new type scintillation crystal, which is more reasonable than the conventional ones are also measured. We also estimated its position resolution. This detector enables us to detect charged particles with higher position resolution and lower cost than conventional scintillation detectors and gas chambers.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.