Issue |
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
|
|
---|---|---|
Article Number | 02115 | |
Number of page(s) | 7 | |
Section | Contributions | |
DOI | https://doi.org/10.1051/epjconf/201818002115 | |
Published online | 04 June 2018 |
https://doi.org/10.1051/epjconf/201818002115
Determination of the applicability limits of the ideal gas model for the calculation of moist air properties
1
KEZ, TU Liberec, Studentská 1402/2, 461 17 Liberec 1, Czech Republic
2
CTU in Prague, FME, Department of Fluid Dynamics and Thermodynamics, Technická 4, 166 07 Praha 6, Czech Republic
* Corresponding author: magda.vestfalova@tul.cz
Published online: 4 June 2018
The submitted paper deals with the finding of such moist air states in which the components of moist air and hence the humid air itself can be described by the ideal gas model while maintaining a predefined accuracy. Both components of moist air (dry air and water vapor) can be described by a model of ideal gas at sufficiently low pressures and sufficiently high temperatures. In the paper, we are looking for such combinations of pressures and temperatures for both components, where the relative deviation in the density calculation using the ideal gas model does not exceed the desired value. In addition, on the basis of the mixture theory, such moist air conditions (characterized by pressure, temperature and specific humidity) are searched, on which the accuracy of the calculation meets the required conditions. Subsequently, diagrams are constructed that can be used to help identify the interface between a moist air area that can be described by a simple ideal gas model, and areas where it is necessary to use a more accurate model for one of the components.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.