Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
---|---|---|
Article Number | 02043 | |
Number of page(s) | 4 | |
Section | Experimental Techniques | |
DOI | https://doi.org/10.1051/epjconf/201818302043 | |
Published online | 07 September 2018 |
https://doi.org/10.1051/epjconf/201818302043
Experimental study of the dynamic behaviour of High Performance Concrete (HPC) under tensile loading
Univ. Grenoble Alpes, 3SR,
F-38000
Grenoble,
France
* Corresponding author: bratislav.lukic@3sr-grenoble.fr
Published online: 7 September 2018
This paper presents the measurement results of the dynamic tensile strength of a High Performance Concrete (HPC) obtained using full-field identification method. An ultra-high speed imaging system and the virtual fields method were used to obtain this information. Furthermore the measurement results were compared with the local point-wise measurement to validate the data pressing. The obtained spall strength was found to be consistently 20% lower than the one obtained when the Novikov formula is used.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.