EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Characterisation of the high strain rate behaviour of tubular materials
Institut de Recherche Dupuy de Lôme, FRE CNRS 3744, ENSTA Bretagne,
2 Autoliv Livbag, Route du Beuzit, 29590, Pont-de-Buis, France
* Corresponding author: email@example.com
Published online: 7 September 2018
Airbag gas generators used in the automotive industry are often fabricated from tubular materials. The present work deals with the development of split Hopkinson tensile bar (SHTB) tests for tubular samples. Tubular specimens were machined from the tubes. A specific gripping system was designed to install the samples between the incident and transmitter bars. The forces acting on the samplegrip assembly were measured using strain gages mounted on the bars. Strain gages were also placed on the specimen in order to obtain the local strain history. Finite element computations were carried out to assess the validity of the experimental setup. It was observed that, in some cases, a vibration of the gripping system may induce oscillations on the force signals. To limit this phenomenon, pulse shapers  were employed in order to obtain a smoother input wave. Several tests were performed for different impact velocities. Strain rates ranging between 100 and 700 s-1 were achieved. Quasi-static tensile tests were also carried out. From the results of the different experiments, it was found that the steel under investigation has significant strain-rate sensitivity. Using inverse analysis, parameters for the Zerilli-Armstrong constitutive model  were identified.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.