| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 03022 | |
| Number of page(s) | 6 | |
| Section | Microstructural Effects | |
| DOI | https://doi.org/10.1051/epjconf/201818303022 | |
| Published online | 07 September 2018 | |
https://doi.org/10.1051/epjconf/201818303022
Incipience and development of spall fracture in 30KHGSA steel, α↔ε transformation, spall fracture and damage recovery
RFNC-FNIITF,
456770. Snezhinsk,
Russia
* Corresponding author: svetlana_malyugina@mail.ru
Published online: 7 September 2018
Results of investigation into strength and elasto-plastic properties of 30KhGSA steel are presented. The investigation was performed with planar samples using submicrosecond shockwave length technique. Shockwave amplitude varied in the range from 4 to 26 GPa and controlled with 0.2% accuracy. Steel sample temperature varied in the range from-90 °C to 670 °C. Stress wave profiles in the samples were registered with VISAR and PDV interferometers having nanosecond time resolution and measurement error better than 0.8%. Special attention was payed to the study of spall fracture incipience and development processes as well as damage recovery (healing), and shockwave passing through the damaged region in steel samples. Relaxation characteristics of dynamic elastic limit were determined. Spall strength magnitude versus strain rate and temperature characteristics was determined. The impact of polymorphic α↔ε transition in 30KhGSA steel on spall strength was studied.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.