EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Response of UHPFRCs in Tension under High Stress Rate
2 DynaMat Laboratory, University of Applied Sciences of Southern Switzerland, 6952 Canobbio, Switzerland
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
The paper presents a part of a full-experimental campaign characterizing various Ductal® mix designs (compressive strength of 150, 170, 210MPa) with various dosages of fibers (2% and 3.25%). The dynamic tests are performed by means of two Modified Hopkinson Bar devices with that are installed at the DynaMat Laboratory in Lugano. The tests, in tension at different velocities were performed on cylindrical notched specimens of 60mm in diameter and 60mm height (notch/radius = 0.20). The preliminary results present different rate sensitivity of the materials. Different behaviours are registered for the materials having matrix with special thermal curing respect to those cured as usual. An important increment of stress was obtained for the matrix where sand was partially replaced by Silica Fume. These results are the base for better understanding the mechanical behaviour in dynamic that will be obtained by further tests on Ultra-High Performance Fibre-Reinforced Concretes (various Ductal® classes). Such data will provide designers better overview of relevant properties of these materials for design of protective structures.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.