EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC)
Institute of Construction Materials, Technische Universität Dresden,
2 DynaMat Laboratory, University of Applied Sciences of Southern Switzerland (SUPSI), Switzerland
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
The paper presents a part of an experimental campaign consisting of quasi-static and impact tensile experiments on three different types of strain-hardening cement-based composites (SHCC) as well as on their constitutive cementitious matrices . The investigation on different SHCC types was intended for analysing the effect of matrix composition and fibre type on the strain rate sensitivity of the composites and for enabling the formulation of material design recommendations for impact resistant SHCC. The dynamic tests were carried out by means of a Modified Hopkinson Bar (MHB) installed in the DynaMat Laboratory in Lugano, Switzerland, which enabled the characterization of the dynamic material behaviour under direct tensile loading in terms of force-displacement relationships.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.