EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Fiber reinforced mortars based on free Portland-CSA binders under high stress rate
University of Bergamo, Dipartimento di Ingegneria e scienze applicate,
2 DynaMat Laboratory, University of Applied Sciences of Southern Switzerland, 6952 Canobbio, Switzerland
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
In this paper, dynamic behaviour of fiber reinforced mortars manufactured with innovative binders based on calcium sulphoaluminate cement (CSA), supplementary cementitious materials (SCMs), gypsum (G) and hydrated lime (CH) was investigated. Fly ash (FA) and ground granulated blast furnace slag (GGBFS) were used to develop sustainable Portland-free cementitious materials. Polypropylene structural fibers (1% by mortar volume) were used to reinforce the cementitious matrix. Fresh properties of mortars were evaluated in terms of workability and specific mass. In addition, elastic modulus, compressive and flexural strength were determined up 28 days from casting. The dynamic behaviour was studied by means of Split Hopkinson Tensile bar having 60 mm in diameter. Preliminary dynamic results reported in terms of stress versus crack opening displacement were evaluated and discussed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.