EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
The performance of armour steels with pre-layers against fragment simulating projectiles
TNO Defence, Safety and Security, Laboratory for Ballistics Research,
Ypenburgse Boslaan 2,
* Corresponding author: firstname.lastname@example.org
Published online: 7 September 2018
Armour steels have proven to be promising solutions for protection against fragments from threat weapons. The area to cover for ship bulkheads is usually large, so cost of the raw material is an important driver. For new ships, additional mass can be compensated for in the design. Past research by TNO and other workers has shown that the ballistic limit V50 of armour steels against fragments is increased significantly by adding a front or pre-layer. This layer can be a variety of materials ranging from cardboard to glass. In TNO’s Laboratory for Ballistics Research a test program was conducted to study the effect of high pressure laminate, polymer and fire insulation pre-layers at the V50 and well above the ballistic limit. The high velocities are typically associated with fragments from relevant threats for warships. Fragment simulating projectiles were fired on armour steel plates of varying type and thickness with these pre-layers and measured the residual velocity and resulting hole sizes. The tests resulted in clear dependencies of the residual velocity as a function of impact velocity and pre-layer (type and thickness). Analysis of the data showed that there are several counteracting effects interacting when a pre-layer is applied to armour steel. The failure mechanism of the steel as well as the hardness and thickness of the pre-layer seem to influence the outcome of this interaction and hence the response of the steel to various pre-layers. The results of this research will be used in the design of fragment and blast resistant bulkheads for future naval ships.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.