EPJ Web Conf.
Volume 203, 201920th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC20)
|Number of page(s)||6|
|Published online||25 March 2019|
Integration of an Electron Cyclotron Imaging diagnostic system on the WEST tokamak
CEA, IRFM, F-13108 Saint Paul-lez-Durance, France
2 Ulsan National Institute of Science and Technology, Ulsan 44919, Korea
3 National Fusion Research Institute, Daejeon 34133, Korea
4 Department of Physics, Pohang University of Science and Technology, Pohang 37673, Korea
* Corresponding author: email@example.com
Published online: 25 March 2019
An Electron Cyclotron Emission Imaging (ECEI) diagnostic system for the WEST tokamak has been developed under the UNIST-WEST collaboration. This diagnostic system is designed to overcome accessibility and thermomechanical constraints for long pulse operation. The first O-mode channel will be installed in the first trimester of 2019 to probe the low field side (LFS) of the WEST plasma. Two large metallic reflective mirrors are installed inside the duct which is being used for maintenance access. They are suspended on a rail to facilitate mirror manipulation. The ex-vessel optical system (lens, detection array, etc.) is housed in a compact optical enclosure that fits in a tight free space between the port flange and tokamak access lobby. The design emphasized reproducibility of the precise alignment between in-vessel mirrors and optical enclosure since the both elements must be removed during shutdown period for maintenance access. The overall optical system was fully tested at UNIST last year. The test results demonstrated that the imaging optics can full access at any radial position on the LFS. The 2D beam pattern measurements were consistent with the design values.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.