EPJ Web Conf.
Volume 210, 2019Ultra High Energy Cosmic Rays 2018 (UHECR 2018)
|Number of page(s)||6|
|Published online||17 May 2019|
Preliminary results of the AMIGA engineering array at the Pierre Auger Observatory
Karlsruhe Institute of Technology, Karlsruhe, Germany
2 Instituto de Tecnologías en Detección y Astropartículas, CNEA-CONICET-UNSAM, Buenos Aires, Argentina
3 Pierre Auger Observatory, Malargüe, Argentina
Published online: 17 May 2019
The Auger Muons and Infill for the Ground Array (AMIGA) aims to both extend the detection range of the Pierre Auger Observatory down to energies ~ 1016.5 eV and to measure the muon content of extensive air showers. To accomplish these goals, its detection system is composed of an array of coupled water-Cherenkov and scintillation detectors deployed in a graded triangular grid of 433 and 750 m spacings. At each position, the scintillation detector is buried 2.3 m deep so as to shield it from the air shower electromagnetic component and thus only measure the muon component. These muon detectors have 30 m2 area split into modules, each of them highly segmented in 64 plastic-scintillator strips with an embedded wavelength-shifter optical fiber to transport light to an optical sensor located at the center of the module. During the engineering array phase (finished in November 2017) two module areas (5 m2 and 10 m2) and two optical sensors (photo-multiplier tubes and silicon-photomultipliers) were tested. In this work, we present the final performance of the muon detectors equipped with silicon-photomultipliers which were thereafter selected as the baseline design for the AMIGA production phase. Analyses and results are based both on laboratory and field measurements.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.