Issue |
EPJ Web Conf.
Volume 213, 2019
EFM18 – Experimental Fluid Mechanics 2018
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 6 | |
Section | Keynote Lecture | |
DOI | https://doi.org/10.1051/epjconf/201921301001 | |
Published online | 28 June 2019 |
https://doi.org/10.1051/epjconf/201921301001
Building a bridge between industry and theory on the example of a new ventilation system
UTP University of Science and Technology in Bydgoszcz, Faculty of Mechanical Engineering, Kaliskiego 7, Poland
* Corresponding author: peszyn@utp.edu.pl
Published online: 28 June 2019
The paper presents the possibilities of simplified determination of the air volumetric flow rate in ventilation ducts. This problem occurred during the tests of local losses in the elements of a new ventilation system based on ducts with a rounded rectangular cross-section. The presented method requires mathematical modelling of the flow velocity distribution in the ducts. The paper presents four models of the velocity distribution. The necessity of using so many models resulted from the wide coverage of the tested sections: Amax/Amin= 46.88.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.