EPJ Web Conf.
Volume 213, 2019EFM18 – Experimental Fluid Mechanics 2018
|Number of page(s)||4|
|Published online||28 June 2019|
Static and dynamic characteristics of proportional directional valve
VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, 708 33 Ostrava, Czech Republic
* Corresponding author: email@example.com
Published online: 28 June 2019
This article deals with experimental measurement and numerical simulation of static and dynamic characteristics of the proportional directional valve. The characteristics of the proportional directional valve are measured on experimental equipment. At the static characteristic, pressure drop on the proportional directional valve, flow and oil temperature are measured on this equipment. The spool position is measured to determine of the dynamic characteristic of the proportional directional valve. Mathematical model of the proportional directional valve is created using Matlab SimScape Fluids software and is complemented by a mathematical model of the experimental equipment. The simulation results on the mathematical model are compared with the results of the experimental measurement.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.