EPJ Web Conf.
Volume 213, 2019EFM18 – Experimental Fluid Mechanics 2018
|Number of page(s)||8|
|Published online||28 June 2019|
Turbulence Models for Simulation of the Flow in a Rotor-Stator Cavity
Victor Kaplan Dept. of Fluid Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic
* e-mail: email@example.com
Published online: 28 June 2019
Modelling of the flow in the cavities between rotor and stator in turbomachines (e.g. pumps or turbines) is a task of great interest. Correctly evaluated pressure and velocity fields enable calculation of the disk losses and therefore assessment of efficiency. It is also crucial for determination of axial thrust and thus design of the bearings. The study demonstrates abilities of various turbulence models to describe the flow in a narrow gap between rotating and stationary disks. Numerical simulations were performed in order to find out the ability of particular models to capture unstable structures appearing during specific operating conditions as well as to calculate the velocity profiles precisely. Large Eddy Simulation (LES), Scale Adaptive Simulation (SAS), Detached Eddy Simulation (DES), Reynolds stress model (RSM) and SST k – ω model were used. Obtained results were also compared with experimental measurement published by Viazzo et al. 
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.