EPJ Web Conf.
Volume 214, 201923rd International Conference on Computing in High Energy and Nuclear Physics (CHEP 2018)
|Number of page(s)||8|
|Section||T1 - Online computing|
|Published online||17 September 2019|
Felix Based Readout of The Single-Phase Protodune Detector
2 Pacific Northwest National Laboratory, Richland, Washington, USA
3 Radboud University, Nijmegen, The Netherlands
4 CERN, Geneva, Switzerland
5 University of Amsterdam, Amsterdam, The Netherlands
* e-mail: firstname.lastname@example.org
Published online: 17 September 2019
The liquid argon Time Projection Chamber technique has matured and is now in use by several short-baseline neutrino experiments. This technology will be used in the long-baseline DUNE experiment; however, this experiment represents a large increase in scale, for which the technology needs to be validated explicitly. To this end, both the single-phase and dual-phase implementations of the technology are being tested at CERN in two full-scale (10 × 10 × 10 m3) ProtoDUNE setups. Besides the detector technology, these setups also allow for extensive tests of readout strategies.
The Front-End LInk eXchange (FELIX) system was initially developed within the ATLAS collaboration and is based on custom FPGA-based PCIe I/O cards in combination with commodity servers. FELIX will be used in the single-phase ProtoDUNE setup to read the data coming from 2560 anode wires organized in a single Anode Plane Assembly structure. With a sampling rate of 2 MHz, the system must buffer and process an input rate of 74 Gb/s. Event building requests will arrive at a target rate of 25 Hz, and loss-less compression must reduce the data within the requested time windows before it is sent to the experiment’s event building farm.
This paper discusses the design of the system as well as first operational experiences.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.