| Issue |
EPJ Web Conf.
Volume 214, 2019
23rd International Conference on Computing in High Energy and Nuclear Physics (CHEP 2018)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 8 | |
| Section | T2 - Offline computing | |
| DOI | https://doi.org/10.1051/epjconf/201921402012 | |
| Published online | 17 September 2019 | |
https://doi.org/10.1051/epjconf/201921402012
Upgrade of CMS Full Simulation for Run 2
1
Tomsk State University,
634050
Tomsk,
Russia
2
CERN, CH1211,
Geneva 23,
Switzerland
3
Fermi National Accelerator Laboratory,
Batavia,
IL,
USA
* e-mail: Vladimir.Ivantchenko@cern.ch
Published online: 17 September 2019
We report on the status of the CMS full simulation software for Run 2 operations of the LHC. Initially, Geant4 10.0p02 was used and about 16 billion events were produced for analysis of 2015-2016 data. In 2017, the CMS detector was updated with a new tracking pixel detector, a modified hadronic calorimeter electronics, and extra muon detectors added. Corresponding modifications were introduced in the full simulation and Geant4 10.2p02 was adopted for 2017 simulation productions; that includes an improved Geant4 for multi-threaded mode, which became the default for 2017. For the 2018 Monte Carlo productions, the full simulation has been updated further. The new Geant4 version 10.4 is used, adopted for the production after detailed validations using test-beam and collision data. The results of validations will be described in details. Several aspects of the migration to Geant4 10.4 and modifications in CMSSW simulation software will be also discussed.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.