EPJ Web Conf.
Volume 224, 2019IV International Conference “Modeling of Nonlinear Processes and Systems” (MNPS-2019)
|Number of page(s)||8|
|Section||Mechanical Engineering and Material Sciences|
|Published online||09 December 2019|
Stability Analysis of Centerless Grinding with Loss of Contact Nonlinearity
CNR – STIIMA, Institute of Intelligent Industrial Technologies and Systems for Advanced Manufacturing National Research Council of Italy, IT-20133 Milan, Italy
2 Politecnico diMilano, Dipartimento di Meccanica, IT-20156 Milano, Italy
Published online: 9 December 2019
The paper presents a novel geometrical stability analysis of centerless grinding that takes into account the nonlinearity associated to wheel-workpiece detachment during lobes formation. Even though the rounding mechanism in centerless grinding has been studied since more than fifty years, stability analysis has been carried out applying stability criteria for linear systems (e.g., Nyquist) on a process model that neglects actual removal “clipping” due to wheel-workpiece detachment. This model limitation is usually overcome by considering only an integer number of lobes, supporting the restriction by the claim that a non-integral number of waves is less likely to build up since the waviness must be constantly removed and replaced by a succeeding wave, which is constantly moving around the workpiece. In this work, the nonlinearity entailed by removal clipping is explicitly taken into account and, by harmonic linearization, represented by a double input describing function (DIDF). Applying the Nyquist criterion on the resulting equivalent delayed system, the paramount instability associated to a quasi-integer number of lobes emerges naturally, without requiring additional assumptions. Moreover, it is shown that the nonlinearity due to wheel-workpiece detachment does not produce a limit cycle in a reasonable operation time. The results delivered by the proposed approach are verified by numeric simulations and positively compared to the relevant literature. The proposed formulation can be easily extended to consider also machine structure dynamics, thus increasing, even in this case, the accuracy of the stability analysis provided by the standard approach.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.