| Issue |
EPJ Web Conf.
Volume 225, 2020
ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
|
|
|---|---|---|
| Article Number | 04032 | |
| Number of page(s) | 5 | |
| Section | Research Reactors | |
| DOI | https://doi.org/10.1051/epjconf/202022504032 | |
| Published online | 31 January 2020 | |
https://doi.org/10.1051/epjconf/202022504032
Determination of backscattered neutrons/gammas from open beam port of a research reactor
1
Reactor Infrastructure Centre Jožef Stefan Institute Ljubljana, Slovenia
2
Reactor Physics Department Jožef Stefan Institute Ljubljana, Slovenia
3
Reactor Physics Department Jožef Stefan Institute Ljubljana, Slovenia
4
Reactor Physics Department Jožef Stefan Institute Ljubljana, Slovenia klemen
5
Reactor Physics Department Jožef Stefan Institute Ljubljana, Slovenia
anze.jazbec@ijs.si
bor.kos@ijs.si
vladimir.radulovic@ijs.si
ambrozic@ijs.si
luka.snoj@ijs.si
Published online: 31 January 2020
Neutron and gamma dose rate calculations were carried out around horizontal beam tube no. 5 at the Jožef Stefan Institute (JSI) TRIGA Mark II research reactor. Results were compared to the experimental measurements in order to verify the computation model. In addition, another set of calculations and measurements was carried out, where an additional shield made out of concrete and paraffin was installed. With that configuration, we were able to study neutron and gamma scattering.
Key words: Reactor Physics / MCNP / ADVANTG
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.