Issue |
EPJ Web Conf.
Volume 237, 2020
The 29th International Laser Radar Conference (ILRC 29)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 3 | |
Section | Space Lidars | |
DOI | https://doi.org/10.1051/epjconf/202023701001 | |
Published online | 07 July 2020 |
https://doi.org/10.1051/epjconf/202023701001
A Comparison of Surface Slopes Extracted from ICESat Waveform Data and High Resolution DEM
College of Surveying and Geo-informatics, Tongji University, 1239 Siping Road, Shanghai 200092, P. R. China
* Email: huanxie@tongji.edu.cn
Published online: 7 July 2020
Surface slope is an important topographic variable, accurate surface slope can support many research appliacations. Large footprint full waveform data has been used to estimate the surface slope and performes well. In this paper, surface slope within laser footprint is calculated using the Ice, Cloud, and land Elevation Satellite (ICESat) Geoscience Laser Altimeter System (GLAS) full waveform data and a high resolution Digital Elevation Model (REMA, the Reference Elevation Model of Antarctica). A comparison is done between two extracted surface slopes, the results show that the slopes extracted from full waveform data are close to slopes extracted from DEM, and the width of waveform can be used to extract surface slope in moderately sloping surface.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.