| Issue |
EPJ Web Conf.
Volume 238, 2020
EOS Annual Meeting (EOSAM 2020)
|
|
|---|---|---|
| Article Number | 06007 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 6- Frontiers in Optical Metrology | |
| DOI | https://doi.org/10.1051/epjconf/202023806007 | |
| Published online | 20 August 2020 | |
https://doi.org/10.1051/epjconf/202023806007
Non-destructive testing of a rotating glass-fibre-reinforced polymer disc by swept source optical coherence tomography
1 Clinical Sensoring and Monitoring, Anesthesiology and Intensive Care Medicine, TU Dresden, 01307 Dresden, Germany
2 Institute of Lightweight Engineering and Polymer Technology (ILK), TU Dresden, 01307 Dresden, Germany
* Corresponding author: Edmund.Koch@tu-Dresden.de
Published online: 20 August 2020
Composite materials are used for high-performance rotating blades, e.g. in turbines and wind power plants. Here, optical coherence tomography was used to visualize large areas of fibre-reinforcedpolymer discs at rotation speeds of up to 1200 rpm. These measurements allowed to visualize the fibre structure over large areas of the disc. By recording the front and back reflex, the wobble of the disc was measured precisely. Additionally, the recorded structure was used to detect even small deviations from a uniform rotation.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.