EPJ Web Conf.
Volume 248, 2021V International Conference “Modeling of Nonlinear Processes and Systems“ (MNPS-2020)
|Number of page(s)||4|
|Section||Workshop on Advanced Materials Processing and Smart Manufacturing|
|Published online||26 April 2021|
Investigation of the Stress-Strain State of the Cavity Profiles for Osteosynthesis Screw Heads
Omsk State Technical University, RU-644050, Omsk, Russia
* Corresponding author: firstname.lastname@example.org
Published online: 26 April 2021
In the modern world, taking into account the active lifestyle of people, the dynamics of growth of complex fractures is observed. Their treatment is associated with rigid fixation of fragments with plates and screws, that is, with the help of osteosynthesis. In the surgical operating room during osteosynthesis is not possible to use auxiliary tools, which can be used to fix the screw with the required screw-in force. As a result, the screw breaks either during surgery or during further operation. This can be avoided by examining the stress-strain state of the screw head for osteosynthesis. By simulating the screw turning process, it is possible to determine the maximum stresses appearing in the screw heads with different profiles, and to choose or develop the profile of the recess under the key, which will be optimal in terms of stress-strain state and manufacturability .
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.