EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||8|
|Published online||08 September 2021|
Feasibility Study of a Combined Tension-Torsion Hopkinson Bar
Università Politecnica delle Marche - DIISM, via Brecce Bianche, 60131, Ancona, Italy
2 Università degli Studi dell’Aquila, Piazzale E. Pontieri, 67100, L’Aquila, Italy
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
The increasing interest to improve the description of the plastic behavior and the fracture prediction for ductile materials under complex loading conditions conducted the researchers to overcome the J2 plasticity theory. To do this more sophisticated plasticity model base on ductile damage have been implemented. Material model parameters must be identified by means of proper testing and calibration procedures requiring different loading conditions. Different types of tests must be performed, imposing multiaxial stress paths to the specimens. Tensile tests on smooth and round notched bars, plane strain tests, torsion tests, compression and combined tension–torsion tests on hollow and solid cylindrical bars must be executed. While multiple works are present in literature for model assessment and validation in quasi-static conditions, nothing can be found at high strain rate in biaxial conditions (tension-torsion). Biaxial tests in dynamic conditions are very difficult to carry out especially if you are interested to register the entire story of stress and strain. In this work, analytical and numerical study to evaluate the feasibility to carry out dynamic tension, dynamic torsion, dynamic torsion-static tension/compression and dynamic tension–dynamic torsion tests is discussed. The tests will be performed using a properly designed Split Hopkinson Bar.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.