| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 8 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/202125001018 | |
| Published online | 09 September 2021 | |
https://doi.org/10.1051/epjconf/202125001018
Design and Simulation of Insert to Measure Dynamic Sliding Friction in a Split-Hopkinson Pressure Bar
Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87544, USA
* Corresponding author: ginny.euser@lanl.gov
Published online: 9 September 2021
Interfacial friction is a key aspect to understanding and modelling dynamic processes in which materials interact. However, friction is a complex phenomenon that depends on a multitude of factors, including sliding velocity. Understanding how friction behavior changes as a function of sliding rate is thus crucial for accurately simulating dynamic processes. Recent literature has shown that the split-Hopkinson pressure bar can be adapted for friction measurements associated with high sliding rates. The present work introduces an insert designed to be transferrable between a quasi-static load frame and a compression split-Hopkinson bar, enabling friction measurements across a wide range of sliding velocities (10-4 – 20 m/s). Here, the split-Hopkinson pressure bar setup is modelled using a multiphysics research code (FLAG), developed at Los Alamos National Laboratory (LANL), to identify and reduce potential issues in the configuration prior to experimental implementation.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.