| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 9 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/202125001029 | |
| Published online | 09 September 2021 | |
https://doi.org/10.1051/epjconf/202125001029
Experimental Investigations of 3D Woven Layer to-Layer Carbon/Epoxy Composites at Different Strain Rates
1
Institute of Structures and Design, German Aerospace Center (DLR), Stuttgart, Germany
2
Engineering Research Institute, Ulster University, Newtownabbey, UK
3
Advanced Composites Research Group, School of Mechanical and Aerospace Engineering, Queen’s University Belfast, Belfast, UK
* Corresponding author: Sanghyun.Yoo@dlr.de
Published online: 9 September 2021
This paper reports experimental investigations of 3D woven carbon/epoxy composites on quasi-static and dynamic tensile properties in the longitudinal (warp) and transverse (weft) directions. Firstly, quasi-static tests were conducted to determine a baseline tensile strength and to find out the adequate specimen geometry required for dynamic testing. Secondly, dynamic tensile properties at intermediate strain rates (nominal strain rates from 0.1 to 200 s-1) were investigated alongside the corresponding failure mechanisms. Detailed information on failure patterns is obtained with strain field measurements from Digital Image Correlation (DIC) and CT scans. The results show that 3D woven composites are strain rate insensitive and the crack initiation is located near weft yarns and binding interlacement points due to the presence of resin rich areas.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.