| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 6 | |
| Section | Industrial Applications | |
| DOI | https://doi.org/10.1051/epjconf/202125004003 | |
| Published online | 09 September 2021 | |
https://doi.org/10.1051/epjconf/202125004003
High Strength Steel (HSS) characterization for numerical simulation of defence applications: from data collection to triaxiality model validation
Shock Physics Department, THIOT INGENIERIE, 830 Route Nationale, France
* Corresponding author: mespoulet@thiot-ingenierie.com
Published online: 9 September 2021
This paper details the methodology developed to fit a material strength/failure model with mesh sensitivity, strain rate influence and triaxiality effect on plastic failure for a blast/ballistic configuration for a HSS plate. Data collection in different loading conditions in quasi-static and dynamic regimes has been done, following a given tests matrix based on the customer phenomenological analysis. A complete set of parameters has been find by numerically reproduce the tests and find the best compromise to fit all the tests performed with a unique set. Tests on large square clamped plates have been performed with three nose shapes (flat, hemispheric and conical) to validate the set of parameters. One case with perforation and another at failure initiation have been done for each geometry. Numerical works using the final set of parameters have shown very good agreement in the various impact conditions.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.