EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||09 September 2021|
On the effects of build orientation, strain rate sensitivity and sample thickness on the mechanical behavior of 316l Stainless Steel manufactured by Selective Laser Melting
Univ. Polytechnique Hauts-de-France, CNRS, LAMIH UMR 8201, 59313 Valenciennes, France
2 Arts et Métiers ParisTech, CNRS, I2M UMR 5295, 33405 Talence, France
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
The Additive Layer Manufacturing (ALM) for metallic materials has grown in the past few years. However, this process influences the mechanical properties of the constitutive material and consequently those of the finished product. The influence of the thickness and the building direction of 316L Stainless Steel (SS) specimens produced by Selective Laser Melting (SLM) on the quasi-static mechanical behavior has already been reported. Considering the strain rate effect, it has been only studied for tensile properties of vertical specimens up to 102s–1. The aim of this work is to study the influence of the thickness and the building orientation at higher strain rates up to 101s–1 and up to 103s–1 for vertical specimens. Compared to conventional material, 316L SS SLM achieves equal and even better mechanical properties due to a refinement of the microstructure. Anisotropy is observed at the macroscopic level, which is explained by the microstructure with different shapes, orientation and size of grains. A minimum thickness of 0.75mm is recommended to recover the mechanical properties of the conventional 316L SS. A positive strain rate sensitivity is observed in every case. The material anisotropy and the thickness variation do not affect the strain rate sensitivity.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.