| Issue |
EPJ Web Conf.
Volume 250, 2021
DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 05016 | |
| Number of page(s) | 6 | |
| Section | Metallic Materials | |
| DOI | https://doi.org/10.1051/epjconf/202125005016 | |
| Published online | 09 September 2021 | |
https://doi.org/10.1051/epjconf/202125005016
Experimental investigation on the effect of platform heating on the dynamic mechanical properties of selective laser manufacturing of AlSi10Mg alloy
1
Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer-Sheva 84105, Israel
2
Department of Materials Engineering, NRCN, P.O. Box 9001, Beer-Sheva 84190, Israel
3
Additive Manufacturing Center of Excellence, Technologies Division, Israeli Aerospace Industries
Published online: 9 September 2021
Additive manufacturing (AM) is one of the emerging promising technology technologies of manufacturing prototypes. The process of AM is based on melting powder by an energetic beam layer by layer to create a three-dimensional body. One of the lightweight alloys that is being used for AM is AlSi10Mg. The process of manufacturing is controlled by several tens of parameters most of which are determined by the machine manufacturer. One of the important parameters is the building platform temperature. In the present study we took samples from different heights of the building platform and measured the dynamic mechanical properties of each sample. It was noted that after a stress relief treatment (SRT) the difference in the static and dynamic mechanical properties along the building direction changed differently. The dynamic mechanical properties of samples that were fabricated in proximity to the building platform did not change after the SRT, while the mechanical properties of the samples that were fabricated far from the platform changed dramatically and became like those that were fabricated near the building plate.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.