EPJ Web Conf.
Volume 250, 2021DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||7|
|Published online||09 September 2021|
Effect of welding and heat treatment on the properties of UHSS used in automotive industry
University of Agder, Jon Lilletuns vei 9, Grimstad, Norway
* Corresponding author: firstname.lastname@example.org
Published online: 9 September 2021
This paper deals with the undesired effects of the heat treatments on the mechanical properties of (UHSS) Ultra High Strength Steel used nowadays in automotive industry to improve crashworthiness performance of vehicles. The UHSS specimens were extracted from certain parts of the car body and subjected to different heat treatments. Four types of specimens were tested: untreated, welded with metal inert gas welding, heat treated at 800 °C, and heat treated at 1250 °C. All heat-treated specimens showed dramatically reduced values of strength. The results suggest that it is important to follow the official repair manuals avoiding unnecessary welding and improper heat treatments of UHSS. The experiments provide the data necessary for constructing a constitutive model and performing a finite-element analysis of improperly repaired UHSS parts.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.