| Issue |
EPJ Web Conf.
Volume 264, 2022
EFM21 – 15th International Conference “Experimental Fluid Mechanics 2021”
|
|
|---|---|---|
| Article Number | 01048 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/202226401048 | |
| Published online | 11 July 2022 | |
https://doi.org/10.1051/epjconf/202226401048
Optimization of the polishing process on a polishing machine with horizontal overarm
1
asphericon s.r.o., 463 12 Jeřmanice, Czechia
2
Technical university of Liberec, Institute of New Technologies and Applied Informatics, 461 17 Liberec, Czechia
3
Technical University of Liberec, Dept. of Power Engineering Equipment, 461 17 Liberec, Czechia
* Corresponding author: tomas.vit@tul.cz
Published online: 11 July 2022
Understanding the basic principles of polishing on machines with autorotating swing kinematics is important for the description and understanding of more advanced polishing technologies. The article deals with the theoretical and numerical analysis of the polishing process and its comparison with the experiment performed during the real process on the machine. The dependence of the mutual position of the tool and workpiece axes on the removal distribution within the polished surface was described and demonstrated
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.