| Issue |
EPJ Web Conf.
Volume 266, 2022
EOS Annual Meeting (EOSAM 2022)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202226603004 | |
| Published online | 13 October 2022 | |
https://doi.org/10.1051/epjconf/202226603004
Design of an Optical Parametric Oscillator using a BBO partial cylinder for a continuous tunability between 0.4 μm and 0.9 μm
1 Teem Photonics S.A, 38240 Meylan, France
2 Univ. Grenoble Alpes, CNRS, Institut Néel, 38000 Grenoble, France
3 Shandong University, State Key Lab of Crystal Materials, Jinan 250100, China
4 Tianjin University of Technology, Institute of Functional Crystals, Tianjin 300384, China
* Corresponding author: baptiste.bruneteau@grenoble-inp.org
Published online: 13 October 2022
This work describes the different steps of the design of a cylindric Optical Parametric Oscillator. It is based on a BBO nonlinear crystal shaped as a partial cylinder to be pumped by a commercial micro-laser at 0.355 μm for an energetic and sub-nanosecond emission continuously tunable between 0.4 μm and 0.9 μm.
© The Authors, published by EDP Sciences
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.