Issue |
EPJ Web Conf.
Volume 266, 2022
EOS Annual Meeting (EOSAM 2022)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 2 | |
Section | Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing | |
DOI | https://doi.org/10.1051/epjconf/202226603003 | |
Published online | 13 October 2022 |
https://doi.org/10.1051/epjconf/202226603003
Ultra-short pulse laser-based fabrication process for lightweight structures in quartz glass applied for mirrors
OST Eastern Switzerland University of Applied Sciences, 9471 Buchs, Switzerland
* Corresponding author: david.bischof@ost.ch
Published online: 13 October 2022
In the following work a manufacturing process for light weight structures in Fused Silica is presented. Such structures can potentially be used for mirrors to decrease the mass by simultaneously ensuring high stiffness. This talk should give the audience the possibility to assess the selective laser etching technology for mechanical structures in the field of optical mirrors.
© The Authors, published by EDP Sciences
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.