| Issue |
EPJ Web Conf.
Volume 269, 2022
EFM19 – Experimental Fluid Mechanics 2019
|
|
|---|---|---|
| Article Number | 01033 | |
| Number of page(s) | 4 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/202226901033 | |
| Published online | 24 October 2022 | |
https://doi.org/10.1051/epjconf/202226901033
Intensification of heat dissipation from electrical elements to closed loop heat pipe
University of Zilina, Faculty of Mechanical Engineering, Department of Power Engineering, Univerzitna 8215/1, 010 26 Zilina, Slovak republic
* Corresponding author: richard.lenhard@fstroj.uniza.sk
Published online: 24 October 2022
Article deals with the problem of heat transfer by condenser and evaporator for a closed loop heat pipe for cooling a hermetically sealed electrotechnical box. In an article can by find the design of the heat exchanger for condenser and evaporator for optimal cooling solution, construction and description of experimental state for measuring their performance. Air and heat exchanger temperatures, system pressure, and cooling air flow data were recorded. The measured values are then evaluated and the cooling capacity of the heat exchangers is expressed by means of a sample calculation. The performances are then compared by means of relevant graphs and verified at the end.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.