| Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
|---|---|---|
| Article Number | 04031 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 4- Nanophotonics | |
| DOI | https://doi.org/10.1051/epjconf/202328704031 | |
| Published online | 18 October 2023 | |
https://doi.org/10.1051/epjconf/202328704031
Fabrication error analysis of nonperiodic-multilayer-dielectric gratings
State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, 100084 Beijing, China
* Corresponding author: zhangd19@mails.tsinghua.edu.cn
Published online: 18 October 2023
We analyzed fabrication errors of nonperiodic-multilayer-dielectric gratings that were designed to have a high reflective diffraction efficiency for one wavelength and a high transmittance for another wavelength at the same time. Significant deviations were found between the measured and calculated efficiency values although the groove profile parameters were very closed to the design values. The source of error was attributed to coating errors of the film stack. To explain the deviation well, we estimated the parameters of actual coating stack by reverse calculations and using scanning electron microscope. We recalculated the diffraction efficiencies and the results showed that the actual film stack parameters were inverted well. This provided a foundation for us to reoptimize grating groove parameters on the basis of actual coating stack.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.