Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
---|---|---|
Article Number | 09020 | |
Number of page(s) | 2 | |
Section | Topical Meeting (TOM) 9- Applications in Optics and Photonics | |
DOI | https://doi.org/10.1051/epjconf/202328709020 | |
Published online | 18 October 2023 |
https://doi.org/10.1051/epjconf/202328709020
Straight micromixer manufacturing combining stereolithography and pulsed laser ablation and simulation - INVITED
1. Photonics4Life research group, Department of Applied Physics, Facultade de Física and Institute of Materials (iMATUS),Universidade de Santiago de Compostela, Campus Vida, Santiago de Compostela, 15782, Spain
2. BFlow S.L., Edificio Emprendia, Santiago de Compostela, 15706, Spain
3. Departament d’Enginyeria Mecànica, Universitat Rovira i Virgili, Tarragona, 43007, Spain
* Corresponding author: maite.flores@usc.es
Published online: 18 October 2023
Achieving efficient mixing of fluids is a great challenge in microfluidics that has been addressed using microstructures. In this work, Stereolithography (SLA) and Pulsed Laser Ablation (PLA) were combined to manufacture a straight micromixer for uniform mixing of fluids. Computational Fluid Dynamics (CFD) simulation was performed to test the device. The results suggest that the combination of these optical technologies can be an effective method for fabricating microfluidic devices with great mixing capabilities.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.