| Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
|---|---|---|
| Article Number | 09026 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 9- Applications in Optics and Photonics | |
| DOI | https://doi.org/10.1051/epjconf/202328709026 | |
| Published online | 18 October 2023 | |
https://doi.org/10.1051/epjconf/202328709026
Investigations on the causes of process vibrations in CNC grinding processes and their effects on achievable surface qualities on fused silica
1 Ernst-Abbe University of Applied Sciences Jena, Carl-Zeiss-Promenade 2, 07745 Jena, Germany
2 Polytec GmbH, Polytecplatz 1-7, 76337 Waldbronn, Germany
3 Batix Software GmbH, Saalstraße 16, 07318 Saalfeld/Saale, Germany
* Corresponding author: Marcel.Binder@eah-jena.de
Published online: 18 October 2023
The presented investigations build on the results already presented at EOSAM 2022 on the in-situ monitoring of grinding processes, in which high correlations between vibrometry, force and topography data of machined fused silica samples could already be proven. With the help of new measurement setups, it was possible to also detect high-frequency vibration components in CNC grinding processes and to check their effects on the resulting surface qualities. The investigations were carried out on a 5-axis CNC machine and monitored with the help of vibrometric and white-light interferometric measurement technology. The aim was to look at the influences of process-side parameters on the process vibrations and the resulting surface qualities.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.