Issue |
EPJ Web Conf.
Volume 308, 2024
ISRD 17 – International Symposium on Reactor Dosimetry (Part II)
|
|
---|---|---|
Article Number | 01011 | |
Number of page(s) | 8 | |
Section | Experimental Techniques, Measurements and Monitoring | |
DOI | https://doi.org/10.1051/epjconf/202430801011 | |
Published online | 11 November 2024 |
https://doi.org/10.1051/epjconf/202430801011
Mutual shielding of neutron activation foils
Nuclear Research and consultancy Group (NRG), 1755 LE Petten, The Netherlands
* Corresponding author: Ippel@nrg.eu
Published online: 11 November 2024
For decommissioning purposes, stacks of foils are used in order to determine the neutron fluence rates in reactor buildings. Due to the relatively great thickness of these foils, self-shielding, as well as mutual shielding become significant for these stacks. In this paper, the results of Monte Carlo calculations are presented for the self-shielding of single foils, and also for the mutual shielding of foils in a stack. Because the irradiation geometry in a reactor building at a large distance from the reactor core is probably not isotropic, especially not so for neutrons of higher energy, the shielding effects were calculated for both isotropic and mono-directional irradiation geometries. The results obtained show a number of general trends which can be understood with a few rules of thumb.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.