Issue |
EPJ Web Conf.
Volume 330, 2025
The 5th International Conference on Electrical Sciences and Technologies in the Maghreb (CISTEM 2024)
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 6 | |
Section | Power Electronics and Energy Conversion | |
DOI | https://doi.org/10.1051/epjconf/202533001003 | |
Published online | 30 June 2025 |
https://doi.org/10.1051/epjconf/202533001003
Design and Manufacturing of Axial Flux Permanent Magnet Machines for Electric Vehicle Applications
IFP Energies nouvelles Institut Carnot IFPEN Transports Energie 1 et 4 avenue de Bois-Préau, 92852 Rueil-Malmaison, France
* Corresponding author: abdenour.abdelli@ifpen.fr
Published online: 30 June 2025
This paper deals with the design and prototype of an open slot 18-slot/12-pole axial flux permanent magnet (AFPM) machine that meet typical electric vehicle requirements. Multiphysics design is conducted to consider mechanical and thermal constraints in the design stage. The electromagnetic design is based on combination of the 2D and 3D FEA approaches. The rotor losses reduction is performed by magnet segmentation and optimization of the rotor disc. The designed machine is manufactured and tested on the test bench. The experimental results are compared with the simulation results. The impact of the manufacturing process on performance, especially iron losses is investigated.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.