Open Access
Issue
EPJ Web of Conferences
Volume 26, 2012
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 04017
Number of page(s) 4
Section Modeling and Numerical Simulation
DOI https://doi.org/10.1051/epjconf/20122604017
Published online 31 August 2012
  1. Lesuer D., Experimental Investigations of Material Model for Ti-6Al-4V Titanium and 2024-T3 Aluminium, US Federal Aviation Administration, William J. Hughes Technical Center’s DOT/FAA/AR-00/25, September 2000.
  2. Van Slycken J., Advanced Use of a Split Hopkinson Bar Setup (PhD, University of GHENT, 2008).
  3. Sasso M., Newaz G. and Amodio D., Materials Science and Engineering (2007).
  4. Shazly M., Nathenson D. and Prakash V., Modeling of High-Strain-Rate Deformation, Fracture, and Impact Behavior of Advanced Gas Turbine Engine Materials at Low and Elevated Temperatures (Case Western Reserve University, Cleveland, Ohio, may 2003).
  5. Panov V., Modelling of Behaviour of Metals at High Strain Rates (PhD, Cranfield University School of Engineering, 2006).
  6. Schwer L., Optional Strain-rate forms for the Johnson Cook Constitutive Model and the Role of the parameter Epsilon_0, LS-DYNA Anwenderforum, Frankenthal, 2007.
  7. Lienhard J., A heat transfer textbook, third edition (Phlogiston press, Cambridge Massachussetts, 2008).
  8. Meyers M., Dynamic behaviour of materials (Wiley, New York, 1994). [CrossRef]
  9. Lambrecht R., Determination of material parameters with the Split Hopkinson Pressure Bars at low temperature (Master thesis, Royal Military Academy, Brussels, 2010).
  10. Berkovic L. Ryckaert R., Chabotier A. Gilson L., Coghe F. Rabet L., Modeling of high temperature Hopkinson tests on AA5083 and Ti6Al4V, 1663-1668, Proceedings of Dymat (2009).
  11. Ryckaert Ruben, Bepalen van materiaalparameters bij hoge temperatuur met de Hopkinson opstelling (Master thesis, Royal Military Academy, Brussels, 2008).
  12. Berkovic L, Chabotier A, Coghe F, Rabet L, Measuring and modeling of low temperature Hopkinson tests, Proceedings of ICM11 (2011)

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.