Open Access
Issue
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
Article Number 02008
Number of page(s) 4
Section Contributions
DOI https://doi.org/10.1051/epjconf/201714302008
Published online 12 May 2017
  1. J. Bochnia, Procedia Eng. 39 (0) (2012), 98–110.
  2. S. Adamczak, J. Bochnia, B. Kaczmarska, Metrol. Meas. Syst. 22 (1) (2015), 127–138.
  3. S. Blasiak, C. Kundera, J. Bochnia, Procedia Eng. 39 (2012), 366–378.
  4. S. Blasiak, A. Pawinska, Int. J. Heat Mass Transf. 90 (2015), 710–718.
  5. D. Gapinski, I. Krzysztofik, (IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA, 2014).
  6. D. Gapinski, I. Krzysztofik, Z. Koruba, J. Theor. Appl. Mech. 52 (3) (2014), 629–639.
  7. D. Janecki, J. Zwierzchowski, L. Cedro, Bull. POLISH Acad. Sci. Sci. 63 (3) (2015), 771–779.
  8. P.A. Laski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  9. E. Miko, L. Nowakowski, Procedia Eng. 39 (2012), 395–404.
  10. E. Miko, L. Nowakowski, Procedia Eng. 39 (2012), 405–413.
  11. L. Nowakowski, M. Miesikowska, M. Blasiak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  12. L. Nowakowski, E. Miko, M. Skrzyniarz, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  13. L. Nowakowski, M. Wijas, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  14. M. Piasecka, Int. J. Refrig. 56 (2015), 198–212.
  15. M. Piasecka, Int. J. Heat Mass Transf. 81 (2015), 114–121.
  16. D.S. Pietrala, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  17. J.E. Takosoglu, R.F. Dindorf, P.A. Laski, Int. J. Adv. Manuf. Technol. 40 (3–4) (2009), 349–361. [CrossRef]
  18. J.E. Takosoglu, P.A. Laski, S. Blasiak, Proc. Inst. Mech. Eng. Part I J. Syst. Control Eng. 226 (10) (2012), 1335–1343. [CrossRef]
  19. J.E. Takosoglu, P.A. Laski, S. Blasiak, G. Bracha, D. Pietrala, Meas. Control. 49 (2) (2016), 62–71. [CrossRef]
  20. J. Zwierzchowski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  21. W. Inman, K. Domansky, J. Serdy, B. Owens, D. Trumper, L.G. Griffith, J. Micromechanics Microengineering. 17 (5) (2007), 891–899. [CrossRef]
  22. B. Li, L. Gao, G. Yang, Energy Convers. Manag. 67 (2013), 92–102.
  23. E. Lisowski, W. Czyżycki, J. Rajda, Energy Convers. Manag. 70 (2013), 220–229.
  24. M.R. Mokhtarzadeh-Dehghan, N. Ladommatos, T.J. Brennan, Appl. Math. Model. 21 (7) (1997), 437–445.
  25. X. Pan, G. Wang, Z. Lu, Energy Convers. Manag. 52 (10) (2011), 3249–3256.
  26. J. Qian, L. Wei, Z. Jin, J. Wang, H. Zhang, A. Lu, Energy Convers. Manag. 87 (2014), 220–226.
  27. C. Srikanth, C. Bhasker, Adv. Eng. Softw. 40 (3) (2009), 193–201.
  28. L. Wang, J. Cui, K. Yao, Chinese J. Chem. Eng. 16 (4) (2008), 541–546. [CrossRef]
  29. Q. Yang, Z. Zhang, M. Liu, J. Hu, Procedia Eng. 23 (2011), 543–550.
  30. G.F. Bracha, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  31. M. Blasiak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2016).
  32. P.A. Laski, J.E. Takosoglu, S. Blasiak, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, 2014).
  33. P.A. Laski, J.E. Takosoglu, S. Blasiak, Rob. Auton. Syst. 72 (2015), 59–70.
  34. S. Blasiak, J.E. Takosoglu, P.A. Laski, (Acad Sci Czech Republic, Inst Thermomechanics, Dolejskova 5, Prague 8, 182 00, Czech Republic, Svratka, Czech Republic, 2014).

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.