Open Access
Issue
EPJ Web Conf.
Volume 143, 2017
EFM16 – Experimental Fluid Mechanics 2016
Article Number 02127
Number of page(s) 5
Section Contributions
DOI https://doi.org/10.1051/epjconf/201714302127
Published online 12 May 2017
  1. J.E. Takosoglu, R.F. Dindorf, P.A. Laski, Int. J. Adv. Manuf Tech. 40, 3–4, 2009 [CrossRef]
  2. P.A. Laski, J.E. Takosoglu, S. Blasiak, Edited by V. Fuis Proceedings of 20th International Conference on Engineering Mechanics 2014 (Brno University of Technology, Czech Republic, 2014)
  3. P.A. Laski, J.E. Takosoglu, S. Blasiak, Robot. Auton. Sys. 72, 2015 [CrossRef]
  4. R. Trochimczuk, M. Gawrysiak, Solid State Phenom. 147-149 (2009) [CrossRef]
  5. R. Trochimczuk, Solid State Phenom. (2013)
  6. R. Trochimczuk, Int. J. Appl. Mec. Eng. 19, 9 (2014a)
  7. R. Trochimczuk, T. Kuźmierowski, Int. J. Appl. Mec. Eng. 19, 9 (2014b)
  8. P.A. Laski, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  9. D.S. Pietrala, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  10. P. Wos, R. Dindorf, Mechatronics: Ideas for Industrial Applications, 317, 2015
  11. M. Blasiak, R. Kotowski, Przeglad Elektrotechniczny, 85, 12, 2009
  12. M. Blasiak, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  13. J.E. Takosoglu, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  14. J.E. Takosoglu, P.A. Laski, S. Blasiak, G. Bracha, D. Pietrala. Meas. Cont. 49, 2, 2016 [CrossRef]
  15. L. Nowakowski, M. Miesikowska, M. Blasiak, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  16. L. Nowakowski, E. Miko, M. Skrzyniarz, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  17. L. Nowakowski, M. Wijas, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  18. R. Farana, B. Walek, M. Janosek, J. Zacek, Proceedings of the 15th International Carpathian Control Conference (ICCC), 2014
  19. R. Nadolski, K. Ludwinek, Przeglad Elektrotechniczny, 4, 2012
  20. H. Wisniewski, L. Plonecki, Proceedings of the 16th International Carpathian Control Conference (ICCC), 2015
  21. E. Miko, L. Nowakowski, L. Procedia Eng. 39 (2012a)
  22. E. Miko, L. Nowakowski, L. Procedia Eng. 39 (2012b)
  23. P. Wos, R. Dindorf, Int. J. Dynam. Control, 2014
  24. P. Wos, R. Dindorf, Int. J. Appl. Mec. Eng. 17, 3, 2012
  25. G.F. Bracha. Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  26. S. Blasiak, J. E. Takosoglu, P. A. Laski, J. Therm. Sci. Techn. 9, 2, 2014 [CrossRef]
  27. S. Blasiak, P. A. Laski, J. E. Takosoglu. Int. J. Heat Mass Tran. 57, 1, 2013 [CrossRef]
  28. S. Blasiak, Int. J. of Heat Mass Tran. 81, 2015 [CrossRef]
  29. S. Blasiak, A. Pawinska, Int. J. of Heat Mass Tran, 90, 2015 [CrossRef]
  30. D. Gapinski, Z. Koruba, I. Krzysztofik, Mech. Syst. Signal. Pr. 45, 2 (2014) [CrossRef]
  31. Z. Koruba, Z. Dziopa, I. Krzysztofik, J. Theor. Appl. Mec. 48, 1 (2010)
  32. I. Krzysztofik, Solid State Phenom. 180 (2012)
  33. I. Krzysztofik, Z. Koruba, J. Automat. Inform. Sciences 44, 5 (2012) [CrossRef]
  34. P. Wos, R. Dindorf, Asian J. Contr. 15, 4, 2013
  35. P. Wos, R. Dindorf, Dynamical Systems - Applications, 2013
  36. J. Zwierzchowski, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  37. D. Janecki, L. Cedro, J. Zwierzchowski, Metrology Meas. Sys. 22, 2, 2015
  38. D. Janecki, J. Zwierzchowski, L. Cedro, B. Pol. Acad. Sci-Tech. Sci. 63, 3, 2015
  39. ISO 6358. Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids
  40. J.E. Takosoglu, P.A. Laski, S. Blasiak, Edited by V. Fuis Proceedings of 20th International Conference on Engineering Mechanics 2014 (Brno University of Technology, Czech Republic, 2014)
  41. S. Blasiak, J.E. Takosoglu, P.A. Laski, Edited by V. Fuis Proceedings of 20th International Conference on Engineering Mechanics 2014 (Brno University of Technology, Czech Republic, 2014)
  42. I. Krzysztofik, Edited by I. Zolotarev, V. Radolf Proceedings of 22nd International Conference on Engineering Mechanics 2016 (Academy of Sciences of the Czech Republic, 2016)
  43. Z. Koruba, I. Krzysztofik, P. I. Mech. K-J. Eng. Multi-Body Dyn. 227, K1, 2013
  44. J.E. Takosoglu, P.A. Laski, S. Blasiak. P. I. Mech. Eng. I-J. Sys. 226, 10, 2012
  45. I. Krzysztofik, J. Takosoglu, Z. Koruba. Annual Reviews in Control. http://dx.doi.org/10.1016/j.arcontrol.2016.10.003

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.