Open Access
EPJ Web Conf.
Volume 170, 2018
ANIMMA 2017 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
Article Number 09005
Number of page(s) 7
Section Environmental and medical sciences
Published online 10 January 2018
  1. H. Paganetti, “Range uncertainties in proton therapy and the role of Monte Carlo simulations,” Phys. Med. Biol., vol. 57, no. 11, pp. R99–R117, Jun. 2012.
  2. C.-H. Min, C. H. Kim, M.-Y. Youn, and J.-W. Kim, “Prompt gamma measurements for locating the dose falloff region in the proton therapy,”Appl. Phys. Lett., vol. 89, no. 18, pp. 183517–3, Oct. 2006.
  3. E. Testa et al., “Monitoring the Bragg peak location of 73 MeV/U carbonions by means of prompt γ-ray measurements,” Appl. Phys. Lett., vol. 93, no. 9, p. 93506, 2008.
  4. J. Krimmer et al., “Collimated prompt gamma TOF measurements with multi-slit multi-detector configurations,” J. Instrum., vol. 10, no. 1, pp. P01011–P01011, Jan. 2015.
  5. J. Krimmer et al., “Development of a Compton camera for medical applications based on silicon strip and scintillation detectors,” Nucl. Instrum. Methods Phys. Res. Sect. Accel. Spectrometers Detect. Assoc. Equip, Elsevier, 787, pp 98–101,2015 <doi:10.1016/j.nima.2014.11.042>. [CrossRef]
  6. J. Krimmer et al., “Real-Time Online Monitoring of the Ion Range by Means of Prompt Secondary Radiations”, published in 3rd International Conference On Advancements In Nuclear Instrumentation Measurement Methods And Their Applications (ANIMMA 2013), Marseille: France 2013.
  7. S. Deng et al., "Very fast front end ASIC associated with multi-anode PMTs for a scintillating-fibre beam hodoscope", Journal of Instrumentation 8 (2013)C01047. DOI:10.1088/1748-0221/8/01/C01047.
  10. M. Schreck et al., “Large-area high-quality single crystal diamond”, MRS Bulletin, vol.39, n°6, pp. 504–510, 2014.
  11. P. Bergonzo et al., “CVD diamond for radiation detection devices”, Diamond and Related Materials 10 (2001). 631–638.
  12. E. Berdermann and M. Ciobanu, “CVD-Diamond Detectors for Experiments with Hadrons, Nuclei, and Atoms”, CVD Diamond for Electronic Devices and Sensors Ed. R. S. Sussmann, 2009 John Wiley &Sons.
  13. M. Ciobanu et al., “In-Beam Diamond Start Detectors” IEEE Trans. Nucl. Sci. 58, No. 4 (2011).
  14. F Schirru et al “Development of large area polycrystalline diamond detectors for fast timing application of high-energy heavy-ion beams” JINST No 7 (2012) P05005 doi:10.1088/1748-0221/7/05/P05005.
  15. C. Weiss et al., n-TOF collaboration, “A new CVD diamond mosaic-detector ofr (n,α) cross-section measurements at the n-TOF experiment at CERN”, proceedings, 13th Vienna Conference on Instrumentation (VCI 2013), Vienna, Austria, February 11-15, 2013, Nucl. Instrum. Meth A732 pp 190–194, 2013.
  16. E. Griesmayer and B. Dehning, “Diamonds for beam instrumentation”, in Proceedings of the 2nd International Conference on Technology and Instrumentation in Particle Physics (TIPP 2011), Chicago U.S.A. (2011) [Phys. Procedia 37 p 1997, 2012].
  18. A. Lacoste et al., “Multi-dipolar plasmas for uniform processphysics”, design and performance, SCi. Technol., 11 pp 407–412, 2002.
  20. P. Moritz, E. Berdermann, K. Blasche, H. Stelzer, B. Voss, “Broadband electronics for CVD-diamond detectors”, Diamond and Related Materials 10 pp 1765–1769, 2001.
  21. D.Breton, E. Delagne, J. Maalmi, “Picosecond time measurement using ultra-fast analog memories”, proceedings TWEPP2009, Topical Workshop on Electronics for Particle Physics. Paris 21-25 September 2009.
  23. M-L Gallin-Martel et al, “Large Area Polycrystalline Diamond Detectors for Online Hadron Therapy Beam Tagging Applications”, IEEE Nuclear Science Symposium & Medical Imaging Conference (2016 IEEE NSS/MIC), 2016, Strasbourg, France.Oct in press, Proceedings of the IEEE NSS MIC 2016
  24. M. Kis et al.,“TCT characterization of new generation of DoI samples”, 4th ADAMAS workshop (2014), Dec. 2014, GSI, Darmstadt.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.